Meezan Engineering Road Safety Experts - Peshawar, Pakistan

Thermoplastic paint (TP):

Thermoplastic paint (TP) is formulated Hydrocarbon Resins And is used for asphaltic pavements only. TP paints is applied on fresh and used asphalts and his a life of more than one year. TP paints is usually applied in summers, it is a hot melted paint applied o road with temperatures on 180 to 220 degrees with Glass Bead type B (< 1mm). TP paint is applied is applied with 1.5mm thickness with screed system of application.
Thermoplastic Road Marking with Road Marking Paint Conforming to BS-3262 at Abdullah Gul Interchange, Ring Road Lahore Project Package-7 (2010).Road marking has been recognized as the most important contribution to road safety. Normal paint sprayed on roads especially in extreme temperature fades away quickly however TP meets the requirements of traffic engineers. This not only offers excellent night visibility but also enforces traffic disciplines and provides necessary information to road users. Thermoplastic (TP) is a high quality road marking material, which is manufactured to give weather and wear resistance. The product provides excellent adhesion and its thicker film gives long life.Thermoplastic Road Marking with Paint Conforming to specification AASHTO 249 and BS-3262 at KKH Economic Corridor Package-1 with CRBC and NHA. Road marking has been recognized as the most important contribution to road safety. Normal paint sprayed on roads especially in extreme temperature fades away quickly however TP meets the requirements of traffic engineers. This not only offers excellent night visibility but also enforces traffic disciplines and provides necessary information to road users. Thermoplastic (TP) is a high quality road marking material, which is manufactured to give weather and wear resistance. The product provides excellent adhesion and its thicker film gives long life.Colour: White & Yellow,

Guard rail are provided with reflectors for safety of the travelling vehicles. Guard rail are especially provided at the places where the road is raised in comparison to natural surface level. Guard rail can be put along any roadside- bridges, medians, and embankments -basically any area where there is a risk of a vehicle going off the roadway. The most common from of guardrail is the W-Beam. The W-beam consists of two "humps "and one "valley ".Humps are rises that face towards the traffic (convex surface), While the valley (Concave surface) points away from the traffic lane. The W-Beam Guard rail measures 13'6 12" in length, 12 14" in height, and 3 14" in width. The lay length of the 13' 6 12" guardrail is 12'6".This lay length represents the distance between the outermost post holes. Thus, a 12'6" panel has post holes centered at 6' 3" apart. The thickness of the W-Beam guardrail is 12 gauges or roughly 1 8" thick. The W-Beam Guardrail can be purchased for both straight and curved roads.

Advantages:
In traffic engineering, guardrails prevent vehicles from veering off the roadway into oncoming traffic, crashing against solid objects or falling into a ravine. A secondary objective is keeping the vehicle upright while deflected along the guardrail. Guardrails are sometimes placed beneath the sides of high-sided heavy vehicles (such as Lorries, semi trucks, etc.). To prevent smaller vehicles from passing underneath the heavier vehicle during a collision and being crushed.

The cat's eye is a retro reflective safety device used in road marking and was the first of a range of raised pavement markers. It consists (in its original form) of two pairs of reflective glass spheres set into a white rubber dome, mounted in a cast iron housing. This is the kind that marks the centre of the road, with one pair of cat's eyes showing in each direction. A single-ended form has become widely used in other colors at road margins and as lane dividers. Cat's eyes are particularly valuable in fog and are largely resistant to damage from snow ploughs. 3M 4”x4” or 100mmx100mm, Plastic 4”x4” or 100mm x 100mm, 8”x4”or 200mm x 95mm,Road studs are installed on clearly defined edges of the road for visibility at night. The are available in different Size in plastic\Acrylic and aluminum shells. The Reflect at night intimating the drivers for potential horizontal hazards. Pavement studs (raised profile type):115mm x 80mm, 100mm x 90mm pavement studs (flush profile type): 100mm x 100mm, 200mm x 100mm, or as required.